Corrosion Solutions
Engineered to End the Corrosion Cycle
40+ Year Real-World Track Record
Systems still performing after decades in pH 0–14 and 200 °C continuous service.
Hybrid Material Technology
Combines fluoropolymers, glass-flake vinyl esters, and Sefar precision fabrics for unbeatable barrier properties.
Zero Structural Replacement
Restore and protect existing assets instead of costly rebuilds.
Certified for the Toughest Standards
ISO 12944 C5M/I, NORSOK M-501, ATEX, FDA, DIBt, and custom client specifications.
The Right System for Every Environment
| Solution Type | Technology | Thickness | Max Temp | Best For |
|---|---|---|---|---|
| Fluoropolymer Linings | PTFE, PFA, FEP, ECTFE, PVDF | 2–6 mm | 260 °C | Ultra-aggressive acids, alkalis, solvents |
| Glass-Flake Vinyl Ester | Novolac + Sefar fabric reinforcement | 1.5–3 mm | 160 °C | H₂SO₄, HCl, bleach, seawater immersion |
| Polyurea + Fabric Hybrid | Fast-cure polyurea + embedded mesh | 2–5 mm | 120 °C | Secondary containment, rapid-return-to-service |
| Rubber Linings | Natural, chlorobutyl, bromobutyl | 4–8 mm | 100 °C | Abrasion + moderate chemical attack |
| High-Temp Ceramic Coatings | Modified silicate + ceramic fillers | 300–800 µm | 650 °C | Stack, ducting, and high-temp process vessels |
| Conductive & Spark-Proof | Carbon-loaded fluoropolymer | 2–4 mm | 200 °C | Explosive atmospheres, solvent storage |
| Tank Base & Floor Systems | FRP + vinyl ester + aggregate | 6–12 mm | 120 °C | Heavy traffic bunds and spill containment |
Trusted Where Failure Is Not an Option
Chemical & Petrochemical
Acid plants, chlor-alkali, fertilizer storage
Mining & Hydrometallurgy
SX/EW raffinate tanks, heap-leach facilities
Oil & Gas
Produced water, flowlines, offshore splash zones
Power & FGD
Scrubbers, limestone slurry, wastewater systems
Marine & Ports
Ballast tanks, cargo holds, seawater piping
Pulp & Paper
Digesters, bleach towers, black liquor tanks
Elixir vs Traditional Methods
| Protection Method | Expected Life in 98% H₂SO₄ | Life in 50% NaOH | Installation Downtime | Repair Cost |
|---|---|---|---|---|
| 316L / Alloy Steel | 6–18 months | 2–5 years | Months | Very High |
| Epoxy / Novolac Coatings | 3–8 years | 5–12 years | 5–14 days | High |
| Rubber Lining | 5–15 years | 8–20 years | 10–21 days | Medium |
| Elixir Fluoropolymer + Sefar Hybrid | 25–40+ years | 30–40+ years | 4–10 days | Low |
One Partner for the Entire Lifecycle
- Corrosion audits & remaining-life assessments
- 3D laser scanning and digital twins
- Material selection & failure analysis
- Surface preparation to SA 3.0 / NACE No.1
- Certified application teams worldwide
- Third-party inspection (NACE, FROSIO)
- 10–25 year performance warranties
- Annual inspection & maintenance programs
End Corrosion Costs for Good
Send us your process conditions, P&ID, or photos of current corrosion damage – receive a fully engineered protection proposal and budget within 48 hours.